Skater Things

This is Skate

How to clean: the sandpaper skate?

HOW TO CLEAN YOUR SANDING!
So folks, at least I had many doubts about it, once I stepped in the mud and then the shape. To clean sandpaper is easy, you know those BRUSHES brushing carpet? So just one of those wet with water and put detergent, brush and sandpaper, and it does not hurt to get wet with just sandpaper scrubbing brush had lost none of his performance, scrub, and then just take a towel, old cloth, or a paper towel and just let up on the sanding, fixing it right now and get ready, your sandpaper'll be brand new!

What you should have a bag of tools skate:

What you should have a bag of tools skateboarding is:
- Lubricant WD-40
- Silver Tool
- A cloth (preferably old)
- Screws alternates
This was the post of the week, folks, now I leave you some links here below:
http://thejotaproductions.wix.com/skaterthings
https://twitter.com/TheLusoMundo

Warning!

Well, personally I for next week and the rest of the year will not have much time to excrever blog, so I can only write on Saturdays. Until the next.

New Pic

What to do when the bearings go less

Well, for meteres your bearings to rotate more, you'll need:
WD-40 Lubricant
Cloth (any one)

First you have to do is, take the wheel bearings and put them on the cloth. After raisins with the same cloth for the bearings to remove dirt and etc..
After metes bearings in the wheels and raisins lube and you're done! Your bearings are well and run better.
question:
Why can not we just get the lubricant directly on the wheel without wheel strip them and passes them through the cloth?
You can not do this, because if not, the story bearings are even more garbage than it already had and ultimately ruin the bearings.

How to Clean Skateboard wheels

Well, to clean out your skateboard wheels, you can not have bearings in them. To clean the wheels you need a reason remover or water, then take a cloth (old, prefered) and begin to move in the entire wheel. Also you can fill a medium bowl with water and put the wheels in there for a while. So now you have to clean your wheels.

Skater Things

How to clean: Skateboard Bearings

I clean my bearings in this way and never gave anything wrong

You will need -
isopropyl alcohol found in pharmacies, a bottle that fits the bearings, oil spray WD-40

STEP 1

put the alcohol in the bottle with bearings deiche one hour the alcohol in the bottle with the bearings in a few minutes deiche lock the bottle one hour to complete

STEP 2

remove the bearings and dry with dryer or air compressor after dry decihe an hour on a bottle of oil wd-40

STEP 3

remove the bearings already lubirficados bottle and transfer the wheel

STEP 4

skirt walking happy and make this beautiful three maintenance in three months

TIPS-

Never soak the bearings rust all!
not pass in places with filth containing sand
never pass grease the bearings ever!!
Always use spray oils
Do not clean your bearings with alcohol (isopropyl alcohol is the pure material that is not rust steel, iron etc) gasoline, paint thinner, turpentine, kerosene and acetone.
the products most recommended for cleanup of skateboard bearings are isopropyl alcohol, diesel oil, wd-40, any oelo spray
clean your bearings three to three months

this cleanup can seem difficult and not traser results plus the result is excellent compensates very same.

Sneakers for Skate

Well, with the research I have done on the net, skateshops ... From what I've seen the best shoes to skate are the nike (my opinion) but not all sneakers are alike, is what I'm going to explain now.
The first thing you need to know when you go to choose a skateboard sneakers is the kind of place where you're going to skate, there are 3 types of soles of sneakers to skate, the vulcanized (type soles Vans), is the sole mounted (type soles Nike Paul Rodriguez).
What is the difference between vulcanized soles or soles mounted?
The difference is that the vulcanized outsole, as it is lower, you'll have a greater sensiblidade the board. For those who like to give maneuvering techniques such as Flip etc.. the vulcanized outsole is the best option if you like to feel the "waves" of skateboarding this is the best option.
Now, if you like jumping over stairs, gaps, etc.. and want to have a more protective of your foot, especially the heel, sole mounted is the best option.

Skate boards (the best)

Depending on the mode width can vary, if you're going to ride in a bowl or on the street will vary the width of the board. If you're going to buy a bigger board, she will give you a larger space to meddle feet (better for ollies, kickflips etc.)
Many people do not know but the smaller boards are the boards street, gives to meddle flips faster, if you're going to walk the streets with spinning maneuvers, you will help because as smaller maneuvers come out faster and is lighter.
Widths boards street:
Between 7.5 and 8.0
Width of the boards of bowl:
Above 8.0

Skate Wax

To make a wax for skateboarding is necessary:
1-Sailing peeled
2-Graphite Powder

Do:
3 - Wrap the candle and put in a pan with low heat.
4 - Expect it melts a little and stick their graphite powder.
5 - When the candle get all liquid mess and pump in a mold in the refrigerator for about 30 minutes and take a candle and have a bank can scrape, grind etc.

Wheels for Skate

Wheels for skateboard, skateboard and depends on where you walk.
Wheels for Long: Soft wide wheels and large diameter for speed without much effort and grip.

Wheels to skate street: wheels with size proportional to the hard skate (51mm to 55mm) which ensures lightweight and low adherence to maneuver as noseslide and tailslide while having grip the ground.

To your foot

when your sneaker is half ruined, put a good strong glue, can find a market for 3 or $ 4

Skate News

Street League is Finish , The Berrics put a video of Luan Oliveira making a very good tricks let see on The Berics site : http://theberrics.com/bangin/luan-oliveira-8-26-2013.html?autoplay
Girl Skateboard make 20 years , let's see the link : https://www.youtube.com/watch?feature=player_embedded&v=iZzNG_ID3hY

New There

Hi , i create that blog  because i want to explain to new skaters or old skaters things and tricks or just to put the news of skate .